An ice machine is a refrigeration system that drinks the local water supply all day, and Pflugerville water is hard. Scale is behind most of the ice machine calls we take here: thin cubes, long harvests, failed cleaning cycles and machines that quit in August when the room is already working against them.

Most often scale on the evaporator and a dirty condenser together. Scale insulates the plate so the ice takes longer to form, and a loaded condenser raises head pressure so the system makes less of it. Both are maintenance rather than failure, and a machine in this state is usually recoverable rather than finished.
Water distribution. A clogged distribution tube, a water pump losing output, or a low water level in the sump means parts of the plate never get flooded. Hollow cubes melt fast in a drink and customers notice before the kitchen does, so this one is usually reported as a quality complaint rather than a breakdown.
The harvest cycle: hot gas valve, harvest thermostat or probe, or a water curtain switch that is not reporting. A machine that freezes a full slab and then sits there is stuck in harvest, and running it that way is hard on the compressor, so it comes offline until the harvest circuit is sorted.
Either production has fallen far enough that it cannot keep ahead of demand, or the bin thermostat or ice level sensor is not telling it to stop. On a hot summer weekend both can be true at once in a busy Pflugerville kitchen, and separating them is the first thing we do.
A blocked drain, a drain line without the right slope or air gap, a cracked sump, or condensation off an uninsulated line in a humid kitchen. Ice machines put a lot of water through a floor drain and a slow drain backs up quietly for weeks before anyone sees standing water.
Biofilm. It grows in the bin and in the water path, and it is a health inspection item rather than a cosmetic one. It also means the machine is overdue for a full clean and sanitize, and in some cases that the water filter has gone past its capacity and is feeding the problem.
Running cleaner through a machine with heavy scale does not always clear it, and running it with the wrong solution can damage the pump and the seals. When a clean cycle is not restoring production, the evaporator and the water path need to come apart rather than another bottle going through it.
Rooftop condensers in Pflugerville collect dust, pollen and grease, and the ambient up there in July is far above anything the machine was rated for. A machine that works all winter and falls apart every summer is almost always telling you about its condenser rather than its compressor.
Modular cubers on storage bins, undercounter machines, nugget and chewable ice machines, flake machines, water-cooled and air-cooled units, remote condenser systems and ice and water dispensers. Common brands include Manitowoc, Hoshizaki, Scotsman, Ice-O-Matic, Follett, Cornelius and Kold-Draft.
We are EPA Section 608 Universal certified and insured, and we can issue a certificate of insurance to a property manager or landlord before work starts.
Restaurants and bars along Pecan Street and FM 685, coffee shops and fast casual at Stone Hill Town Center, convenience stores near the SH 130 and Toll 45 interchanges, schools and daycares, gyms, medical and dental offices, and event venues.
The commercial diagnostic is one hundred forty nine dollars and it is credited toward the repair once the work is approved. For a bar or a restaurant without ice, we will tell you on the phone whether this is a same-day fix or a part that needs ordering, so you can arrange bagged ice if you need to.
Every six months at minimum, and every three to four months on Pflugerville water or in a kitchen with grease in the air. Manufacturers tie warranty coverage to documented cleaning, and most of the production complaints we see come from machines that are overdue.
Yes, more here than in most places. A scale-inhibiting filter slows the buildup that costs you production and shortens the life of the water pump, the valves and the evaporator. Filters have a capacity rating and need changing on a schedule rather than when they stop working.
Because ambient temperature determines how much heat it can reject. A machine that is marginal because of scale or a dirty condenser still manages in February and falls short in July. The summer failure is the symptom; the condition was there months earlier.
Usually, yes. Pumps, valves, boards, thermostats and sensors are all serviceable parts and a well-maintained cuber lasts a long time. A failed compressor or a leaking evaporator on an older unit is where we will give you both numbers and let you decide.
Same day when the schedule allows. A bar or restaurant with no ice is treated as urgent, and it helps to tell us the brand and model on the phone so the common parts are on the truck when we arrive.
Tell us the brand and model, when it was last cleaned, and whether it is making thin ice or no ice at all, and we can usually tell you what to expect before we arrive. Call (737) 388-3867. The one hundred forty nine dollar commercial diagnostic is credited toward the repair.